Argendon XStorm Plus review
Argendon XStorm Plus review covering specifications, installation fit and two owner reports. Understand the limits of this small evidence sample.
The Plus has a documented wheeled pump format, but its two listing reports support convenience more than long-term performance.
At a Glance
Manufacturer image · Argendon
KEY FEATURES
- Built-in condensate pump
- Two wheels and a folding/telescopic transport handle
- LCD shows inlet and outlet temperature and humidity
- MERV-8 filter
- 85-pint AHAM claim; test temperature and humidity remain unconfirmed
Editorial assessment
Research-based conclusions · manufacturer documents and attributed owner reports
Moisture control
Similar nominal class to Pro
Both sheets list an 85-pint AHAM figure; matching temperature/RH conditions are not confirmed here. A product suffix does not settle drying performance.
Drainage usability
Ask one complete routing question
The diagram labels a 19.6-foot drain height. Confirm the complete hose, fittings, elevation and destination rather than treating that figure as approval for every route.
Installation & service access
Rolling and lifting are different tasks
The published 63-pound cabinet needs a route plan. Setup-convenience reports do not establish that stairs or thresholds will be manageable.
Running-cost evidence
Fleet value is not measured efficiency
The short owner accounts do not establish lifetime cost or an energy advantage. Compare actual service terms and measured consumption separately.
These are editorial judgments, not measured performance scores or customer stars. Read the supporting analysis.
PROS
- An owner describes useful hose and cord reach.
- Explicit manufacturer drain-height labeling.
CONS
- Short ownership evidence does not establish reliability.
- Heavy cabinet still needs a handling plan.
Price and availability subject to change
For XStorm Plus, start with the route between the machine and the drain.
Its specification diagram labels a 19.6-foot drain height. That is a useful manufacturer claim to investigate, but it does not approve every combination of hose length, fittings and elevation. The manufacturer listing and its two owner accounts do not resolve those conditions for your installation.
Prepare one complete routing question
- Sketch the highest point and the complete hose path.
- Identify the hose, connections and destination proposed for that route.
- Ask whether this complete arrangement is supported by the current Plus documentation.
Keep the height specification attached to its stated conditions. Do not replace it with the length of the supplied hose, or assume that a maximum applies regardless of the rest of the route.
Convenient reach still leaves a 63-pound move
The owner material supports interest in setup convenience, not a measured handling result.
- Think about whether the cabinet will roll between accessible positions or need to be lifted over a threshold or down stairs.
- Those are materially different uses of a wheeled appliance.
Plus and Pro have similar nominal specifications. If choosing between them, request the exact delivered contents and service terms rather than using a name or a fleet buyer’s value judgment as proof of lower lifetime cost. The detailed owner analysis below keeps the short observation periods visible.
Pros & Cons Analysis
Research sources and limitations are described in this review.
Pros
Daniel’s several-week account identifies reach as a real setup convenience, while leaving the actual route dimensions unspecified.
It is evidence of that experience, not permission to extend the hose arbitrarily.
The sheet names drain height rather than leaving the reader to infer it from hose length.
That improves route screening, but the manufacturer still needs to confirm any unreported conditions.
Cons
Only two listing reports were visible.
Neither supplies long-term pump service history or measured capacity, so reliability and removal-speed rankings remain unassigned.
At a published 63 pounds, the wheeled design does not eliminate stair or threshold handling.
Measure the route before choosing it for occasional household relocation.
Confirm the full route before choosing Plus
Check the complete route
Put Plus on the list when documented pump height and a movable cabinet fit your use, then validate the complete drain route.
Read the owner signal carefully
Treat its owner evidence as an early convenience signal.
No cost or speed winner
There is no verified reason here to choose Pro for faster drying or Plus for lower lifetime cost.
Frequently Asked Questions
Does the Plus have long-term owner evidence here?
The visible two-report sample does not establish long-term reliability.
Is a 19.6-foot hose the evidence for lift?
The Plus sheet separately labels drain height; use that specific claim and confirm its conditions. Do not infer lift from hose length alone.
Technical Specifications
| Removal capacity at 80°F / 60% RH | 85 pints/day labeled AHAM; temperature/RH basis not confirmed here |
|---|---|
| Advertised saturation capacity | 180 pints/day advertised; separate from AHAM figure |
| Drainage options | Built-in pump |
| Built-in condensate pump | Yes |
| Documented pump lift | 19.6 ft labeled drain height on Plus sheet; full route conditions need confirmation |
| Humidity control type | Not verified for this exact edition |
| Selectable humidity settings | 25–80% RH published |
| Remote control support | Not verified for this exact edition |
| Unit dimensions (L × W × H) | 21 × 11.6 × 17.3 in, manufacturer order |
| Unit weight | 63 lb |
| Required airflow clearance | Confirm exact manual and resolve any ambiguous units before installation |
| Rated airflow | 210 CFM published |
| Stated operating temperature | 33.8–110°F published |
| Power supply | 115 V / 60 Hz |
| Rated current | 5.9 A |
| Published efficiency metric | Manufacturer COP 2.5 L/kWh; not established as IEF |
| Published sound pressure | Below 58 dBA on Plus/Pro sheets; test distance not established |
| Filter rating | MERV-8 |
| Refrigerant | R32 |
| Warranty coverage | Headline coverage is not a verified parts/labor/exclusions schedule |
| Independently checked certification | Exact-model independent registry match not completed |
